MyAPRby Aus Property ReportOpen the app

Logging what you notice at an open home

An open home lasts twenty minutes and you are sharing it with thirty other people. MyAPR’s log screen is built for that: big taps, ready-made words, and a camera that is always one press away, so you can get it down and keep walking.

Opening the log

Open a home and the middle of the tab bar becomes a raised red Log button. Tapping it opens Add to your visit for that home. The photo icon on a home’s card does the same thing and lands you straight in the camera, for when a photo is the only thing you have time for.

Likes, then Dislikes, then Things to check

The three tabs are in that order on purpose. Most of what makes you remember a home is what you liked about it, so that is what MyAPR asks for first — Likes is already selected when the screen opens.

  • Likes — fifteen ready-made words like good natural light, plenty of storage and quiet street. Tap the ones that fit.
  • Dislikes — the same idea for what put you off.
  • Things to check — anything you want a proper look at later. This one asks where were you? first, then what you noticed, and you can stop at whatever level of detail you have. “Wet areas” on its own is a perfectly good note.

None of the ready-made words fit? Type your own and it joins the list. Every tag you keep becomes a pill on the home’s page, counted, so a home with the same thing noticed three times shows it three times.

Notes and photos

Below the tags is a plain note box — anything you want to remember, in your own words. Notes stay separate from tags: tags become pills you can count and compare, notes become tiles you can reopen.

The camera sits at the top of the screen as a strip, and tapping it opens the full viewfinder. The shutter is visible either way, so a photo is never more than one press away. Every photo taken while the log is open attaches to that log, and you can swipe through them, or remove one, before you save.

If a camera is not available or you have not granted permission, MyAPR falls back to your device’s own photo picker.

Saving, and reopening later

Everything is saved to the home as you add it: a tag when you tap it, a photo when you take or choose it. A note is saved when you tap Save note, and that is also when MyAPR reads it for anything it mentions, so nothing is read while you are still typing. See home goes back to the home; there is nothing left to save first.

Back on the home, tapping a note tile or a pill reopens the same log, with everything you wrote still in it. Add to it after the second inspection rather than starting again.

Where it all goes

Tags, notes and homes are saved to Aus Property Report’s servers under an anonymous session — no account, no sign-up. Photos are the exception: they stay on the device that took them, so they will not appear if you open MyAPR on another phone or in another browser.

Noticing, not diagnosing

Everything you record here is what you could see, on the day, from where you were standing. That is useful — it is the raw material for the questions you ask the agent, and for what you hand to an inspector. It is not an assessment of the building, and MyAPR never treats it as one. Anything you are unsure about belongs in a building inspection.

Open MyAPR and log a visit

Next: The condition check