MyAPRby Aus Property ReportOpen the app

The condition check

Most people walking through an open home know something is worth a second look but cannot name it. The condition check is a prompt: six areas of the home, forty things worth a look, in the words you would actually use — and example photos so you can tell whether what you are staring at is the thing being described.

Where to find it

Open a home and look under Do more with this home — the Condition check tile opens it and shows how far through you are. You do not have to finish it in one go, or at all. The bar at the top counts how many of the forty you have looked at, and how many you have put on this home’s list of things to check.

Six areas

They open one at a time, so you are only ever reading the part of the home you are standing in.

  • Outside — Street view, perimeter, walls, windows, cladding.
  • Site and ground — Garden, paths, driveway, drainage, retaining walls.
  • Roofline and ceiling — Roof visible from the ground, gutters, internal ceilings.
  • Inside rooms — Living, bedrooms, hallway, entry.
  • Wet areas — Bathroom, ensuite, laundry, kitchen.
  • Decks, balconies and external structures — Deck, balcony, stairs, pergola, verandah, carport.

Area, then what you noticed, then what it looked like

The walkthrough narrows in three steps, and you can stop at any of them.

  1. The area — where you are.
  2. What you noticed — plain rows like Cracks, Damp / stains, Gutters / downpipes or Uneven floors, each with an example of what people mean by it.
  3. Which description matches — a short list of the ways that usually shows up. Under Cracks outside, for instance, is External wall cracks: stepped, diagonal, horizontal or vertical cracks in brick or render. Tick any that match. This step is optional — it is fine to keep it general.

Open one of those descriptions and you get four short pieces of plain English: what you may see, why it may matter, what to do next, and a line about the limits of looking — for example, that the width of a crack on its own does not tell you the cause or how serious it is.

Two rows exist for the times none of that applies. Not sure lets you save the area with a photo and a note and nothing else. Not safe to view records that you could not get a proper look — and MyAPR leaves it there. Do not climb on a roof or crawl under a house to fill in a form; that is what an inspector is for.

What the example photos are for

Each description carries a small set of approved reference photos. Tap one to swipe through them full screen. They are there for recognition only — to help you answer “is this the thing they mean?” while you are standing in front of it.

They are not comparisons for grading your home against, and matching a photo does not tell you how serious anything is. Two walls that look identical in a photo can have completely different causes behind them, which is exactly why the next step is a person who can look properly.

Looks fine, Not sure, Something’s off

Three buttons, and tapping one saves straight away. You can add a note underneath if you want to remember why.

  • Looks fine — nothing stood out to you. It moves your progress along and nothing else.
  • Not sure — you noticed something but cannot tell. It joins this home’s Things to check.
  • Something’s off — worth asking about. It also joins Things to check, marked more strongly.

Everything you mark shows up as a counted pill on the home, so when you get to the point of booking an inspection you have a written list of what to ask about, in the order you noticed it.

Noticing, not diagnosing

The condition check records visible signs, observed on the day, from wherever you could safely stand. It is a triage tool for a buyer at an open home. It is not a building inspection, it does not look at anything concealed, and it cannot tell you the cause or the seriousness of what you noticed. Anything that matters to your decision belongs with a building inspector, who may in turn recommend a specialist for a closer look.

Open MyAPR and walk a condition check

Next: The planning snapshot